Biocompatibility and histological responses of eggshell membrane for dental implant-guided bone regeneration.

Guided bone regeneration (GBR) utilizing eggshell membrane (ESM) as a potential biomaterial for dental implant therapy augmentation was explored in this study. ESM, an environmentally friendly waste product, possesses collagen-rich characteristics. The biocompatibility and histological responses of ESM were investigated in a rat model. Twelve young adult Wistar rats were used in this study. ESM samples were implanted in subcutaneous and intramuscular pockets, and samples were collected at 48 hours, 4 weeks, and 8 weeks post-implantation. Histological analysis revealed the changes in ESM over time. Results showed that ESM maintained its structural integrity, induced a moderate cellular response, and exhibited slow degradation, indicating potential biocompatibility. However, the lack of organized collagen arrangement in ESM led to the formation of irregular and polymorphic spaces, allowing cell migration. Encapsulation of ESM by newly proliferating collagen fibers and multinucleated giant cells was observed at later time points, indicating a foreign body reaction. Crosslinking might improve its performance as a separation membrane, as it has the potential to resist enzymatic degradation and enhance biomechanical properties. In conclusion, ESM demonstrated biocompatibility, slow degradation, and lack of foreign body reaction. While not suitable as a complete separation membrane due to irregular collagen arrangement, further research involving crosslinking could enhance its properties, making it a viable option for guided bone regeneration applications in dental implant therapy. This study highlights the potential of repurposing waste materials for medical purposes and underscores the importance of controlled collagen structure in biomaterial development.

Comparison of the Eggshell and the Porcine Pericardium Membranes for Guided Tissue Regeneration Applications.

Guided bone regeneration is frequently used to reconstruct the alveolar bone to rehabilitate the mastication using dental implants. The purpose of this article is to research the properties of eggshell membrane (ESM) and its potential application in tissue engineering. The study focuses on the structural, mechanical, and histological characteristics of ESM extracted from Gallus domesticus eggs and to compare them to a commercially available porcine pericardium membrane (Jason® membrane, botiss biomaterials GmbH, Zossen, Germany). Thus, histology was performed on the ESM, and a comparison of the microstructure through scanning electron microscopy and atomic force microscopy (AFM) was conducted. Also, mechanical tensile strength was evaluated. Samples of ESM were prepared and treated with alcohol for fixation and disinfection. Histological analysis revealed that the ESM architecture is constituted out of loose collagen fibers. However, due to the random arrangement of collagen fibers within the membrane, it might not be an effective barrier and occlusive barrier. Comparative analyses were performed between the ESM and the AFM examinations and demonstrated differences in the surface topography and mechanical properties between the two membranes. The ESM exhibited rougher surfaces and weaker mechanical cohesion attributed to its glycoprotein content. The study concludes that while the ESM displays favorable biocompatibility and resorb ability, its non-uniform collagen arrangement limits its suitability as a guided bone regeneration membrane in the current non-crosslinked native form. Crosslinking techniques may enhance its properties for such applications. Further research is needed to explore modifications and processing methods that could leverage the ESM's unique properties for tissue engineering purposes.

Statistical Comparison of the Mechanical Properties of 3D-Printed Resin through Triple-Jetting Technology and Conventional PMMA in Orthodontic Occlusal Splint Manufacturing.

Dental 3D-printing technologies, including stereolithography (SLA), polyjet (triple-jetting technology), and fusion deposition modeling, have revolutionized the field of orthodontic occlusal splint manufacturing. Three-dimensional printing is now currently used in many dental fields, such as restorative dentistry, prosthodontics, implantology, and orthodontics. This study aimed to assess the mechanical properties of 3D-printed materials and compare them with the conventional polymethylmethacrylate (PMMA). Compression, flexural, and tensile properties were evaluated and compared between PMMA samples (n = 20) created using the "salt and pepper" technique and digitally designed 3D-printed samples (n = 20). The samples were subjected to scanning electron microscope analysis. Statistical analysis revealed that the control material (PMMA) exhibited a significantly higher Young's modulus of compression and tensile strength (p < 0.05). In the flexural tests, the control samples demonstrated superior load at break results (p < 0.05). However, the 3D-printed samples exhibited significantly higher maximum bending stress at maximum load (MPa) (p < 0.05). Young's modulus of tensile testing (MPa) was statistically significant higher for the control samples, while the 3D-printed samples demonstrated significantly higher values for elongation at break (p < 0.05). These findings indicate that 3D-printed materials are a promising alternative that can be effectively utilized in clinical practice, potentially replacing traditional heat-cured resin in various applications.

Improving the Mechanical Properties of Orthodontic Occlusal Splints Using Nanoparticles: Silver and Zinc Oxide.

The goal of the current study was to determine the mechanical proprieties of polymethylmethacrylate (PMMA) and the improved compound, the graphene-based PMMA, with Zn and Ag and to compare the results. Scanning electron microscopy analysis of the samples before and after the mechanical test was conducted. The compression behavior, flexural properties, tensile strength, and shape of the samples were all investigated and compared between the variants of PMMA. Commercially available polymethylmethacrylate was used (Orthocryl®-Dentaurum, Ispringen, Germany) with the salt and pepper technique according to the manufacturer's instructions to produce 20 samples for each mechanical trial with standard cylinders (4 mm diameter × 8 mm length) for compression, parallelepipedal prisms for flexing (2 mm × 2 mm × 25 mm) and flat samples for traction. There was no statistical difference in the mechanical proprieties of the samples evaluated, although there were values that could suggest significance. The graphene-based PMMA demonstrated good mechanical proprieties, like the commercially available PMMA, and appears promising for future clinical use based on its multiple advantages.

Characterization of eggshell as a bio-regeneration material.

Objective: The objective of this study was to identify and summarize the characteristic features of eggshell for regeneration purpose in oral surgery procedures. Methods: A review of literature was undertaken based on the PubMed database. A search to reveal the current state of knowledge and the current uses of the eggshell as a biomaterial was performed. The characteristics of the materials, the specific use, the procedure and the outcome were extracted from the articles. Results: The materials have been found to be used in humans, animals, and in vitro studies. There is a wide use regarding oral surgery especially in experimental models. There have also been attempts to enhance certain properties and improve the capabilities of eggshell as a biomaterial. There is yet a commercial product to be developed and approved for human use. Conclusions: Eggshell can be an important biowaste which can be of use in guided bone regeneration procedures, but it has not yet entered the commercial phase and approval through official regulation channels.

The quality of life after cleft lip and palate surgery.

Background and aims: Labio-maxillo-palatal clefts represent one of the most common congenital malformations, which manifests through aesthetic, functional and psycho-social alterations. The long course of multidisciplinary treatments represent a psycho-emotional and financial burden for both the patient and his family, being an important factor in the complex management of these patients.The study aims to assess the quality of life of parents of children with clefts and the psychosocial impact on the family and society. Methods: The study included 40 subjects who met the inclusion criteria for this study. Following patient informed consent and the approval of the ethics committee, the data were collected by applying the quality-of-life evaluation questionnaire. The evaluation was performed using the Likert scale (1 - not at all to 5 - very satisfactory), and the data were statistically processed. Results: Most of the questionnaires were completed by the mother, who accompanied the child to the regular check-up; 58% of parents believe that their social life is not affected by having a child with a cleft, and 83% say that interfamilial relationships have not been affected. Most parents consider that the postoperative result was very good, which led to improved psycho-social integration of the child. Conclusions: The study confirmed an acceptable quality of life for the children's parents, which was not influenced by the family presence of a child with a cleft. At the same time, the excessive care of the parents for the child with the cleft was confirmed. The postoperative improvement of the aesthetic aspect led to a much better psycho-emotional integration of the child in the society.

Lateral Cephalometric Analytical Uses for Temporomandibular Joint Disorders: The Importance of Cervical Posture and Hyoid Position.

The temporomandibular joint disorder (TMD) is a syndrome that affects the masticatory muscles and temporomandibular joint (TMJ). Its pathophysiology is not yet fully known. Cephalometric analysis is used for routine evaluation regarding orthodontic treatment and other purposes. The aim of this study was to assess if using cephalometric analysis and TMJ conservative therapy to evaluate the hyoid bone position and the cervical posture reduced symptoms in adults with TMDs compared to no intervention. The authors conducted a systematic review of the literature (PubMed, Cochrane, Web of Science, Scopus, and Embase) for clinical studies of TMDs with conservative treatment and lateral cephalometric analysis of the hyoid and cervical posture. To assess the risk of bias for non-randomized clinical trials ROBINS-I tool was used. Out of 137 studies found, 6 remained to be included. Most of them found a link between TMD and lateral cephalometric analysis, but there was a high risk of bias. This review found a possible link between TMDs, the neck and cervical posture. There is a benefit reported regarding the use of the lateral cephalometry as a treatment, but more extensive prospective randomized clinical trials are necessary to be able to draw definitive conclusions.

Is miRNA Regulation the Key to Controlling Non-Melanoma Skin Cancer Evolution?

Non melanoma skin cancer (NMSC) is one of the most common types of skin cancer. It has a number of subtypes, which include basal cell carcinoma, cutaneous squamous cell carcinoma and Merkel cell carcinoma. MicroRNAs are short, non-coding RNA (ribonucleic acid) molecules, capable of regulating gene expression at a post transcriptional level. They play a pivotal role in a variety of physiologic cellular functions and pathologies, including malignant diseases. The development of miRNAs represents an important study field, which has been extensively exploited in melanoma for almost a decade with promising results, therefore we consider it a stepstone for further research projects also in non-melanoma skin cancers. The aim of our study was to explore the current literature in order to present the role of the different miRNAs in some of the most frequent types of NMSC pertaining to oncogenesis, evolution and therapy. The most relevant and accurate available data from the literature were evaluated. Our study concluded that there are almost 100 miRNAs which can be upregulated or downregulated and can play a role in oncogenesis. They can be easily identified in circulation, are stable and they can be important diagnosis/prognosis and therapy monitoring markers.

New and Recovered Temporary Anchorage Devices, In Vitro Assessment of Structural and Surface Properties.

The orthodontic miniscrew (TADs) is a device that is fixed into bone in the short term for the purpose of enhancing orthodontic anchorage. The aim of our study was to investigate the structural and surface properties of recovered TADs after orthodontic treatment, and compare them to new TADs. TADs (n = 15) from the same manufacturer (Absoanchor; Dentos, Daegu, Korea) were assessed; n = 10 were recovered from patients after orthodontic treatment and n = 5 were new. We performed electrochemical investigations, scanning electron microscopy (SEM) and microbiological analysis. Qualitative analysis on general electrochemical polarization revealed that the TADs retrieved from the patients provided much lower current densities in the passivity zone, and the oxidative processes taking place on their surface were of lower intensity. The surface morphologies of the tips of the retrieved mini-implants showed less sharp tips and smooth surfaces. Defects in the form of pores or cracks could be identified in both evaluated TAD groups. All retrieved TADs showed signs of biological materials (SEM analysis) and contamination on their surfaces. In conclusion, these results can assist orthodontists in comprehending the complexities of TAD behavior with respect to their design and structure.

Evaluation of Prognostic Factors for Palatal Fistulae after Cleft Lip and Palate Surgery in a North-Western Romanian Population over a 10-Year Period.

Cleft lip and palate is the most frequent birth anomaly, with increasing reported rates of complications, such as palate fistulae. Current studies concerning the occurrence rate of cleft lip and palate (CLP) report 2 to 10 cases in 10,000 births. The purpose of this study was to investigate the existence of factors that could predict the occurrence of fistulae after cleft lip and palate surgery. A retrospective study was performed by collecting and analyzing data from all patients who were operated for cleft lip and/or palate in the Maxillo-Facial Department of the Emergency Clinical County Hospital of Cluj-Napoca, Romania, between 2010 and 2020. We investigated the existing evidence for possible links between the number of fistulae observed after the primary palatoplasty and the age at which the primary palatoplasty was performed, the sex of the patient, the type of cleft, the timing of the surgical corrections, and the presence of comorbidities. A total of 137 cases were included for analysis. A significant link between the number of fistulae and the type of cleft was found (with fistulae occurring more frequently after the surgical correction of CLP-p < 0.001). No evidence was found for the existence of significant links between the number of fistulae and the patient's sex, the timing of surgery, or the presence of comorbidities. This study concluded that the incidence of palatal fistulae appears to be influenced by the type of cleft (CLP), but not by the sex of the patient, the timing of surgery, or the presence of comorbidities.

Engaging a polylactide copolymer in oral tissue regeneration: first validation of Suprathel® for guided epithelial and osseous healing.

The present study investigated the capacity of Suprathel® (a copolymer membrane, so far validated for skin regeneration) to also regenerate oral tissue - mucosa and bone, by comparing this biomaterial, in a split-mouth rabbit model, to Mucoderm®, a xenogeneic collagen matrix certified for keratinized oral mucosa healing. The clinical reason behind this experimental animal model was to determine whether the benefits of this advanced skin regeneration product (Suprathel®) could be conveyed for future evaluation in clinical trials of oral tissue regeneration in humans. The outcomes of this study validated the use of Suprathel®, a terpolymer of polylactide with trimethylene carbonate and ε-caprolactone, for stimulation of oral epithelium and alveolar bone regeneration in rabbits. Both Suprathel® and Mucoderm® exhibited comparable results and the null hypothesis stating a comparable regenerating effect of these two materials could not be rejected.

An Orthodontic Approach for Garre's Sclerosing Osteomyelitis of the Mandible.

The nonsuppurative osteomyelitis of the mandible is a rare condition that can occur in children due to low-grade inflammatory processes, dental cavities, periodontal lesions as well as the eruption process of the teeth. We submit a case report involving the orthodontic management of a 9-year-old female patient who presented in our service in the mixed dentition period with diagnosed Garre's sclerosing osteomyelitis of the entire mandibular body. After a full work-up, the following symptoms and signs were noted: bilateral temporomandibular joint (TMJ) pain, loss of the leeway space, anterior open bite, distalization of the secondary maxillary right canine, nail biting and tongue thrust. Our orthodontic objectives were to relieve the TMJ pain, limit the eruption process of the teeth and to diminish the evolution of the osteomyelitis, reduce the growth of the inferior lower third of the face and to prevent further invasive treatment of the patient. In the first phase of treatment, we established a centric relationship using an orthopedic appliance (occlusal splint) and physiotherapy to deprogram the muscles and the TMJ. Throughout the second phase of treatment, we used orthopedic appliances to inhibit the overeruption of the secondary molars. After another year of treatment, the osteomyelitis lesions were under control with the permanent teeth in final position, good facial esthetic and as a functional result, no root resorption. We can conclude that by using low physiological forces to direct and control the growth pattern, good results could be obtained in stabilizing and controlling the sclerosing osteomyelitis of the mandible.

Ligature induced periodontitis causes atherosclerosis in rat descending aorta: an experimental study.

INTRODUCTION: In recent years a link between periodontitis and cardiovascular diseases has been proposed. Oxidative stress has been found to be involved in their pathophysiology. OBJECTIVES: The aim of this study was to demonstrate that a wire ligature placed around the first mandibular molars of the rat causes inflammation in the periodontium and lipid deposits in the aorta, via oxidative stress. METHODS: Twenty male Wistar rats were divided randomly into two groups of 10: Control group and Periodontitis group. An orthodontic wire ligature was placed around the cervix of the first mandibular molar and was kept in place for 4 weeks. Clinical attachment loss was determined to assess the gingival recession. Aorta was harvested after 4 weeks and the malondialdehyde (MDA) levels in the aorta tissue homogenate were determined. Lipid deposits were evaluated using Oil Red staining and immunofluorescence under confocal microscopy. Total lipid deposits in the aorta were assessed using a computer morphometry system. RESULTS: Significant gingival recession was observed in the Periodontitis group in comparison with the Control group. Increased MDA levels were present in the aorta in the ligatured rats in comparison with the Control group. Significant lipid deposits were observed in the aorta of the Periodontitis group as opposed to the Control group. CONCLUSIONS: The affixing of an orthodontic wire ligature produces gingival recession, increased oxidative stress and lipid deposits in the rat descending aorta.

The Influence of Eggshell on Bone Regeneration in Preclinical In Vivo Studies.

The aim of this study is to systemically review the available evidence on the in vivo behavior of eggshell as a guided bone regeneration substitute material. Five databases (PubMed, Cochrane, Web of Science, Scopus, EMBASE) were searched up to October 2020. In vivo animal studies with a bone defect model using eggshell as a grafting material were included. Risk of bias was assessed using SYRCLE tool and the quality assessment using the ARRIVE guidelines. Overall, a total of 581 studies were included in the study, 187 after duplicate removal. Using the inclusion and exclusion criteria 167 records were further excluded. The full text of the remaining 20 articles was assessed for eligibility and included in the qualitative and quantitative assessment synthesis. There were different methods of obtaining eggshell grafting materials. Eggshell is a biocompatible grafting material, with osteoconduction proprieties. It forms new bone similar to Bio-Oss and demineralized freeze-dried bone matrix. It can be combined with other materials to enhance its proprieties. Due to the high variability of the procedures, animals, production and assessment methods, no meta-analysis could be performed. Eggshell might be considered a promising biomaterial to be used in bone grafting procedures, though further research is needed.

Clinical applications of avian eggshell-derived hydroxyapatite.

The search for bone reconstruction materials and methods is an ongoing challenge. The aim of this review is to systemically search the available literature concerning the clinical performance of eggshell as a substitute material in guided bone regeneration in oral surgery. Five databases (PubMed, Cochrane, Web of Science, Scopus, and Embase) were searched up to February 2020. Clinical trials that used eggshell as a bone substitute material were included in the review. Animal and in vivo studies were excluded from the review. ROBINS-I was used to evaluate the risk of bias. A total of 840 studies were retrieved, out of which 55 full-text articles were screened. Five studies were finally included: one study showed critical and four serious risk of bias. A total of 74 patients and 88 intervention sites were included in the five studies. Clinical and radiological evaluation showed complete healing during the follow-ups. Statistically significant radiological and clinical evidence of new bone formation was achieved for socket preservation, grafting after third molar extraction, and cystic/apicectomy grafting. One patient with complications was reported. Histological analysis and micro computed tomography confirmed that it promotes bone regeneration. A comparison with synthetic hydroxyapatite showed similar healing characteristics. Within the limitations of the included studies, the eggshell can be safely and efficiently used in guided bone regeneration procedures, but more research is needed to completely evaluate the full potential of this material.

Grape Seed Extract Reduces the Degree of Atherosclerosis in Ligature-Induced Periodontitis in Rats - An Experimental Study.

The associations between periodontitis and cardiovascular diseases have been intensely studied in recent years. Oxidative stress is involved in the initiation and both progression of periodontitis and atherosclerosis. Antioxidants can reduce the effects of oxidative stress on inflammatory diseases. Our aim was to measure the effects of a grape seed extract (GSE), rich in antioxidants, on atherosclerosis caused by ligature-induced periodontitis in rats. Thirty male Wistar rats were randomly divided into three groups of 10: control group, periodontitis group, and periodontitis group treated with GSE (GSE group). Periodontitis was induced by placing an orthodontic wire around the cervix of the first mandibular molar and keeping it in place for 4 weeks. On days 1, 7 and 28, blood samples were taken to assess oxidative stress and inflammation markers (malondialdehyde and glutathione - MDA, reduced glutathione - GSH, C reactive protein) and lipids. After 4 weeks, the animals were euthanized, and aortas were collected for histopathologic examination. MDA was significantly higher in Periodontitis group compared to the other groups only at day 7. GSH was significantly increased in the Control and GSE groups on days 1 and 7, compared to Periodontitis group and on day 28 higher in GSE vs. Periodontitis groups. C reactive protein was significantly increased in the Periodontitis group on days 1 and 7 compared to both groups. Cholesterol was significantly decreased in the aortas of GSE group at day 28 compared to the Periodontitis group. Oral administration of a grape seed extract reduces the oxidative stress, inflammation and atherosclerosis in a rat model of ligature-induced periodontitis.

Clinical indications and radiation doses of cone beam computed tomography in orthodontics.

Cone beam computed tomography can be used in pediatric population when a tridimensional analysis of dental and maxillofacial bone structures is required. Even though CBCT is considered a low dose radiological examination, ionizing radiation is a known human carcinogenic factor. Furthermore, biological effects are more important in young patients because of their higher radiosensitivity. Orthodontic treatment is typically initiated at young ages and the most common radiographs at this age are dental. This makes it important to quantify the effects of diagnostic radiographs, in particular of CBCT, due to the fact that the radiation doses are higher compared to conventional radiological methods. So far, the carcinogenic response after low dose radiation exposure is not fully understood in the scientific literature. The aim of our review was to emphasize the main indications of CBCT in orthodontics and to evaluate the radiation doses and potential risks of CBCT irradiation of pediatric patients.

Systemic drugs with impact on osteoarthritis.

Articular cartilage has a complex structure and metabolism which allow for a proper movement within joints. Nevertheless, several systemically administered pharmacological agents have been proved to improve the anabolic response in the case of cartilage lesions. Alendronate, glucosamine, chondroitin sulfate, hyaluronic acid, collagen hydrolysate, vitamin C, vitamin D, aspirin and strontium ranelate have shown positive results in clinical trials. On the other hand, calcitonin, risedronate, doxycycline, and celecoxib did not slow the progression of cartilage lesions in clinical trials. Other systemic drugs or supplements such as teriparatide, leptin, zoledronic acid, bevacizumab, atorvastatin, omega-3 fatty acid, naringin, MSM, selenium, zinc, magnesium, resveratrol, donepezil, naproxen, etodolac, ursodeoxycholic acid (UDCA), lithium chloride, and rebamipide showed positive results in in vitro and animal studies but clinical trials are needed to confirm the positive impact on cartilage repair. A number of molecules, not currently available on the market, have also shown promising results in cartilage healing, such as licofelone, sclerostin, cyclopamine, cyclodextrin polysulfate, AG-041R, osteoprotegerin, rhMK, ß-cryptoxanthine, NF-κb essential modulator binding domain (NBD), TGF-ß-neutralizing antibody, osteogenic protein-1 (BMP-7), fibroblast growth factor 2 (FGF2), and RhBMP-2. Currently available systemic drugs that impair cartilage healing are represented by corticosteroids, vitamin A, and fluoroquinolones.

Histological Change in Soft Tissue Surrounding Titanium Plates after Jaw Surgery.

The aim of this study was to evaluate the microscopic structure of soft tissue covering titanium plates and screws used in jaw surgery (mandible fracture and orthognathic surgery), after a minimum period of 12 months from insertion, and to quantify the presence of any metallic particles. Periosteum covering the osteosynthesis plates was removed from 20 patients and examined by light microscopy in order to assess the cell morphological changes and the possibility of metal particles presence in the soft tissue. Local signs of tissue toxicity or inflammation were taken into consideration when evaluating the routine removal of titanium maxillofacial miniplates. No signs of screw loosening or acute inflammation were detected on the osteosynthesis site, but de-coloration of the periosteum was seen, and metallic particles were observed to have migrated into the soft tissues. Even if the titanium is well-tolerated by the human body in time, without severe local or general complications, our findings suggest that plate removal should be considered after bone healing has occurred.

New Dental Implant with 3D Shock Absorbers and Tooth-Like Mobility-Prototype Development, Finite Element Analysis (FEA), and Mechanical Testing.

BACKGROUND: Once inserted and osseointegrated, dental implants become ankylosed, which makes them immobile with respect to the alveolar bone. The present paper describes the development of a new and original implant design which replicates the 3D physiological mobility of natural teeth. The first phase of the test followed the resistance of the implant to mechanical stress as well as the behavior of the surrounding bone. Modifications to the design were made after the first set of results. In the second stage, mechanical tests in conjunction with finite element analysis were performed to test the improved implant design. METHODS: In order to test the new concept, 6 titanium alloy (Ti6Al4V) implants were produced (milling). The implants were fitted into the dynamic testing device. The initial mobility was measured for each implant as well as their mobility after several test cycles. In the second stage, 10 implants with the modified design were produced. The testing protocol included mechanical testing and finite element analysis. RESULTS: The initial testing protocol was applied almost entirely successfully. Premature fracturing of some implants and fitting blocks occurred and the testing protocol was readjusted. The issues in the initial test helped design the final testing protocol and the new implants with improved mechanical performance. CONCLUSION: The new prototype proved the efficiency of the concept. The initial tests pointed out the need for design improvement and the following tests validated the concept.